Two USB-A 3.2 Gen 1, one USB-C 3.2 Gen 1, one USB-C power Two USB-A 3.2 Gen 2, one USB-C 3.2 Gen 2, one USB-C power Note that the Anker 10-Port 60W USB 3.0 Hub ships with only a USB-A–to–USB-B cable, so you’ll have to buy a separate USB-B–to–USB-C cable to connect it to many modern computers. As a bonus, it’s aesthetically inoffensive-it doesn’t look like it belongs with the greatest hits of ugly ’90s technology, unlike some of the other hubs we’ve tested. It has seven upward-facing USB-A 3.1 Gen 1 data ports with a helpful LED activity indicator for each it also has three 12-watt (2.4-amp) power ports just for charging.

If you have access to a Thunderbolt 3 Mac, the next time you update the OS, make sure the TB3 to TB2 adapter is connected to your computer, so that the firmware of the adapter can be udpated simultaneously.If you’re mainly concerned about connecting to your computer as many devices as you can, choose the Anker 10-Port 60W USB 3.0 Hub.

This only works for Thunderbolt 3 devices, not for USB-C devices like the Neutrino U3.1.

The bandwidth will be limited to around 1375 MB/s due to the Thunderbolt 2 interface.

If your Thunderbolt 3 device provides power to your laptop over Thunderbolt, this function will not be available anymore. Bus-powered devices like the T3-10G are not supported.

The Thunderbolt 3 device has to be a self-powered device.

The miminum system requirements for that adapter are macOS Sierra but we recommend using macOS High Sierra or above. This is currently the only bi-directional adapter.

Yes, you can use the Thunderbolt 3 to Thunderbolt 2 adapter from Apple to connect a Thunderbolt 3 device to a Thunderbolt 2 computer. FAQ - Frequently Asked Questions - Knowledge BaseĬan I connect a Thunderbolt 3 device to a Thunderbolt 2 Mac?

Connect mac to pc usb 3